language

NEWS CENTER

Producing the best brake drum & wheel hub in China

Home

Installation requirements for Recessed exit sign

Sep 09,2022

Installation requirements for safe evacuation signs. 1. The manufacturer of the Recessed exit sign tells you that in the evacuation passage, the "emergency exit" sign should be set on the walls on both sides of the passage and at the corners, and the upper edge of the sign should not be greater than 1m from the ground;

2. The manufacturer of the Recessed exit sign tells you that the safety sign can also be set directly on the ground and covered with a non-combustible transparent and firm protective plate. The distance between the signs should not be greater than 20m, and the distance from the end of the bag-shaped walkway to the signs should not be greater than 10m.
3. The manufacturer of the Recessed exit sign tells you that at the exit of the evacuation channel, the "emergency exit" sign should be set on the edge of the door frame or on the upper part of the door. The height Al of the upper edge of the sign spleen from the ceiling should not be less than 0.5m, and the height h2 of the lower edge of the sign at the location from the ground should not be less than 2.0m.
Through the above introduction and analysis of the Installation requirements for the Recessed exit sign, hope it helps you.