language

NEWS CENTER

Producing the best brake drum & wheel hub in China

Home

Recessed exit sign manufacturers take you to understand the specification selection of that exit sign

Aug 26,2022

Size. The manufacturer of the Recessed exit sign tells you that the size of the exit sign is fixed at 359×149×23mm, and the hole distance/ring distance is 260/220mm. Recessed exit sign manufacturers tell you that emergency signs should be installed at about 300-500mm from the ground. Input voltage: AC220V Charging time: <24 hours, Light source: LED ultra-bright semiconductor light-emitting tube, Emergency power: 6w, battery type and type are generally 1.2V800mAh nickel-cadmium battery.

1. The Recessed exit sign manufacturer tells you that the exit sign can be used for buildings with a building height not greater than 27m. When the building area of any floor of each unit is greater than 650m2, or the distance from any door to the nearest safe exit is greater than 15m, The safety exits on each floor of each unit shall not be less than 2; 2. For buildings with a building height greater than 54m, the safety exits on each floor of each unit shall not be less than 2. Recessed exit sign manufacturers tell you that safe exit signs should be set up in places: 1. Tourist attractions, open-air casinos, urban streets, squares, parking lots and bazaars, etc. 2. The specified buildings. 3. Stations, airports, ports, docks, bridges, tunnels, gas stations, vehicles and underground works, etc. 4. Forest areas, mining areas, oil fields and offshore drilling platforms, etc. 5. Other places where fire safety signs are set.
The above information is the Recessed exit sign manufacturer's introduction and analysis of the specification selection of that exit sign, hope it helps you.